Small dust | Large dust |
collector | collector |
(Mounted on | (For |
main unit) | changeover) |
Carry Handle
How to move machine
•Raise handle to enable movement of machine.
•During transportation the saw band guard should be fully down and close to the table.
•Do not use guarding for handling or transportation.
CAUTION:
• If handle is raised too high, the machine may topple over.
MAINTENANCE
CAUTION:
•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
NOTICE:
•Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
Cleaning
Clean out sawdust and chips from time to time. Carefully clean the blade guard and moving parts inside the band saw.
Lubrication
To keep the band saw in
To reduce the emitted noise, always be sure that the blade is sharp and clean.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
ACCESSORIES
CAUTION:
•These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•Band saw stand
•Hex wrench
•Rip fence
•Miter gauge
•Circular ruler
•Extension table
•Sanding belt attachment
19