Xerox 701P21091 manual Rtext Djde options and definitions, Rtext Djde example

Using Dynamic Job Descriptor Entries (DJDEs)

Syntax RTEXT = {NONE sc (sc [, {passnum ALL} [, line [, col [, fontindex]]]]) rtextid}

Options

	Table 5-52. RTEXT DJDE options and definitions
Option	Definition
sc	string constant
	Specifies the message to be printed (a string of 1 to 132 characters). It is
	printed with the first font specified in the FONTS parameter of the PDE
	command. (Refer to the fontindex option in this table).
passnum	pass number
	An integer specifying the single copy (pass) to which the text applies. If there
	are two or more RTEXT parameters in a ROUTE command, passnum must be
	in increasing numeric order.
ALL	Specifies that the text applies to all copies.
line	Specifies the line number on which the first line of a block of RTEXT message
	is printed. To avoid overprinting, only one RTEXT parameter may be specified
	per line for a passnum.
	The default is line 1 for the first text string of the pass. Otherwise, the default is
	the next line of the page.
col	column.
	Specifies the column number at which the first character of a block of RTEXT
	messages is to be printed.
	The default is column 1.
fontindex	Identifies the index (starting with 1) of the PDE font with which the text is
	printed.
rtextid	route text identifier
	Used to reference a catalogued file of RTEXT parameters previously compiled
	by XJDC. A file of the type .TST is referenced.
NONE	Specifies that no text is to be printed on a separate page.

RTEXT DJDE example

RTEXT=(’TEST’,ALL,15,5,2);

END;

Using LCDS Print Description Language 5-63