Xerox 701P21091 manual Options 54. Sefmap Djde options and definitions, Sefmap Djde points to note

		Using Dynamic Job Descriptor Entries (DJDEs)
Options
	Table 5-54. SEFMAP DJDE options and definitions
Option	Definition
(font1, font2)	Font pair, where font2 is the SEF mapping for font1.
(fontm, fontn)	Font pair, where fontn is the SEF mapping for fontm.
UPD	UPDATE
	Indicates that the specified font pairs change existing font mappings or
	appending new mappings to the current font mapping table.
REP	REPLACE
	Indicates that the specified font pairs create a new mapping table to replace
	the current one.
NONE	Disables short edge feeding (SEF) and font mapping (stops a previous
	SEFFNT specification).
		SEFMAP DJDE: points to note

•UPD and REP options affect only memory resident font mapping tables (not disk resident tables such as those found in JDLs).

•If you want to use 11 by 17 inch, A4, or any size paper that requires short edge feed, be aware that the system does not scale or rotate form, logo, and image files. The graphic file must be created in the desired orientation.

•A SEFMAP DJDE that is in the data stream is processed whether or not the JDL contains short edge feed commands.

SEFMAP DJDE examples

Following are examples of how the SEFMAP DJDE works.

Example 1:

SEFMAP=((font1,font7), (font5,font6),UPD);

Before the SEFMAP DJDE shown above was encountered, the contents of the memory font mapping table were:

((font1,font2), (font3,font4))

After the SEFMAP DJDE is processed, the contents of the memory font mapping table are:

((font1,font7), (font3,font4), (font5,font6))

Using LCDS Print Description Language 5-65