Xerox 701P21091 manual Output SF2FUNCTION, Output Shift

Specifying print format parameters

OUTPUT SF2FUNCTION

Specifies to the third party finisher whether or not it should perform the user-defined SF2 operation on the current report.

This parameter provides control over third party finishing devices that conform to the DFA standard. You use it to invoke Finishing Function SF2 through the DFA channel C7. The user must specify what function SF2 will have. (Refer to your finishing equipment vendor documentation for information on what function should be specified for your finisher.)

Syntax OUTPUT SF2FUNCTION = {NO YES}

Options

Table 4-71. OUTPUT SF2FUNCTION parameter options and definitions

Option	Definition
YES	Instructs the finisher to initiate the user-defined SF2 Finishing Function on the
	current sheet.
NO	Specifies that Finishing Function SF2 will not be implemented on the current
	sheet.
Default		NO
		OUTPUT SHIFT
		Shifts the image of the data for three-hole paper, binding,
		finishing, and edgemarking. Specifies that the entire content of
		the page will be shifted, and the amount and direction of the
		shift.
		Image shift is the shifting of the image data (system page)
		relative to the physical page. This shifting is vertical for
		landscape pages and horizontal for portrait.
Syntax		OUTPUT SHIFT = {YES NO (v1, v2)}

4-76 Using LCDS Print Description Language