Xerox 701P21091 manual Bform Copies Duplex JDE JDL Otext Rtext

Specifying print format parameters

•RTEXT is imaged on a separate physical sheet. The line and column specifications for positioning the text refer to the first logical page specified in the PDE.

•RAUX criteria that is found on any logical page on the physical page causes that sheet to be fed from the tray containing the stock identified as the AUX stock.

•Accounting statistics are accumulated on the basis of physical pages.

•If any logical page overflows the physical page before BOF is encountered, the next line moves to the first logical page of the next side, and all subsequent logical pages are repositioned based on BEGIN values.

•With the exception of DEPT and SHIFT, all page oriented DJDEs take effect at a logical page boundary.

•When the following DJDEs are applied, the current page position moves to the first logical page on the front side of a new physical sheet:

–BFORM

–COPIES

–DUPLEX

–JDE

–JDL

–OTEXT

–RTEXT

•The following DJDEs cause the current page position to go to the first logical page on the next physical side of the sheet:

–FORMAT

–FORMS

•If no BEGIN parameter is specified, the default PDE FMT1 (one logical page per physical page) is used.

•The DP EPS systems support the specification of horizontal position values with up to four decimal places; the other Xerox LPS systems support a maximum of only three places.

•The placement of the values of the BEGIN parameter on the DP EPS, 4850 LPS, 4890 LPS, and DP92C LPS is relative to the top edge of the physical sheet for all paper sizes. On the 4635 and DP180 LPS, however, an A4 paper size specification causes the image to shift approximately 1/8 inch (3 mm) downward.

Using LCDS Print Description Language 4-95