Xerox 701P21091 Options 13. Acct User parameter options and definitions, Acct command example

Specifying print format parameters

Default Built from the JDL name by adding “.JDL” to the name.

ACCT DEPT The department name (sc) is printed on the accounting sheet, parameter: point and is entered into the accounting log for the report.

to note

ACCT USER

Specifies the delivery destination of the one-page accounting summary for each report. This page is always printed in the same mode (duplex or simplex) as the report.

Syntax ACCT USER = {BIN TRAY BOTH NONE}

Options

Table 4-13. ACCT USER parameter options and definitions

Option	Definition
BIN	Directs an accounting page to the output bin.
TRAY	Directs an accounting page to the sample tray.
BOTH	Directs an accounting page to the output bin and the sample tray.
NONE	Specifies that no accounting page is delivered.

Default BIN

ACCT command: points to note

•If the report completion code on the accounting page is other than Completed, an accounting page is delivered to the tray, even if USER=NONE is coded. This is done to notify you of a possible report integrity problem.

•Accounting information is accumulated at processing time, not during printing. If the report does not complete successfully, use the Customer Accounting feature to obtain printing status.

ACCT command example

ACCT USER=BOTH, DEPT=’MARKETING’;

The command example above specifies that after each report is printed, an accounting page is delivered to both the output bin and sample tray.

4-10 Using LCDS Print Description Language