Canon MP-C635 user manual Resending a Fax After an Error, To Cancel Automatic Redialing

STOP

To Cancel Automatic Redialing

To cancel automatic redialing, press the STOP button. However, you cannot cancel redialing while the LCD displays AUTO REDIAL (the unit is waiting to redial). In this case, wait until dialing begins and then press STOP to cancel redialing. The MultiPASS asks you to confirm:

YES = (*) NO = (#)

To cancel the redialing, press *. The MultiPASS beeps and the LCD displays:

TX/RX CANCELLED

TX/RX NO. XXXX

The unit then prints an error report:

PRINTING REPORT

Resending a Fax After an Error

If you get an error while sending a fax from memory, the MultiPASS can resend it to the same destination without having to rescan it. To do this, the On Error Resend option must be set in the Advanced: Send Fax panel of the MultiPASS Fax Setup Utility. See “Setting Up Advanced Fax Send Options” in Chapter 3, Using the MultiPASS Fax Setup Utility for details.

You can also set how much of the fax is sent again:

❍The entire document (All Pages)

❍The first page of the document, the page on which the error occurred, and all following pages (Error & First Pages)

❍The page on which the error occurred and all pages following the error (Error Pages)

NThe fax is erased from memory after it is successfully sent or after the resending fails.

4-8 Sending Faxes With the MultiPASS C635 Chapter 4