Manual Receive (Manual)—Require you to manually answer the incoming call and then set the MultiPASS for an incoming fax

Answering Machine Mode (AnsMode)—Automatically receive a call with your answering machine

Distinct Ring Pattern Detect (DRPD)—Automatically switch between receiving a call either as a fax or telephone call based on the ring tone for each type of call (This setting is applicable only if you subscribe to a special network service with your phone company that defines multiple ring tones for your phone line.)

Answer Silent Receive

You select this option to set the MultiPASS not to ring for an incoming fax. (This is applicable only in Fax/Tel Mode and Fax Only Mode.) The default is Silent Receive enabled.

Answer Number of Rings

If you cleared the Silent Receive option, indicating you want the MultiPASS to ring for incoming fax calls, you specify the number of times the MultiPASS should ring for the fax call. The MultiPASS will only ring if you have connected a telephone. The default is 2 rings.

Receive Conditions

For the MultiPASS C635, the Receive Condition is always set to Print Fax.

Report Print

You can specify whether or not you want a report to print with each fax reception (Every Transmission), only when there is an error (Only Errors), or no report (None). The default is None.

Restore Defaults

If you want to restore the options on the Receive Fax panel to the factory defaults, click the Restore Defaults button.

3-8 Using the MultiPASS Fax Setup Utility

Chapter 3

Page 76
Image 76
Canon MP-C635 user manual Answer Silent Receive, Answer Number of Rings, Receive Conditions, Report Print