Setting Up Advanced Receive Fax Options

You can change the following options by clicking the Advanced button on the Receive Fax setup panel.

Speed

You can set the transmission speed used to receive faxes. The default is 14,400 bps. The higher the setting, the faster the fax is received. If you experience problems when receiving faxes, try a lower speed setting.

Error Correction (ECM)

You can select this option to reduce system and line errors when receiving a fax. With this option selected, the system checks each incoming fax for lost data. If data has been lost from a portion of a page, the system receives that portion again after confirming that all data within that portion can be received successfully. The default is ECM enabled.

Fax/Telephone Switching Options

You set the options if your Receive mode is Fax/Tel switching.

Listen Time Before Ringing

When a call is received, the MultiPASS checks to see if the call is from a fax machine or a telephone. If the MultiPASS does not have enough time to detect the fax tone, it assumes the call is from a telephone. You use this option to set the appropriate amount of time to allow the MultiPASS to check for the type of call. The default is 8 seconds.

MultiPASS Fax Setup Utility

Chapter 3

Using the MultiPASS Fax Setup Utility 3-9

Page 77
Image 77
Canon MP-C635 Setting Up Advanced Receive Fax Options, Fax/Telephone Switching Options, Listen Time Before Ringing