Restore Defaults

If you want to restore the options on the Send Fax panel to the factory defaults, click the Restore Defaults button.

Setting Up Advanced Send Fax Options

You can change the following options by clicking the Advanced button on the Send Fax setup panel.

Speed

You can set the transmission speed used to send faxes. The higher the setting, the faster the transmission. If you experience problems when sending faxes, try a lower speed setting. The default is 14,400 bps.

Pause Duration

You can set the length of the pause that you may have to insert when dialing a long distance number. The default is 2 seconds.

Error Correction (ECM)

You can select this option to reduce system and line errors when sending a fax. With this option selected, the system checks each outgoing fax for lost data. If data has been lost from a portion of a page, the system transmits that portion again after confirming that all data within that portion can be transmitted successfully. The default is ECM enabled.

MultiPASS Fax Setup Utility

Chapter 3

Using the MultiPASS Fax Setup Utility 3-5

Page 73
Image 73
Canon MP-C635 Setting Up Advanced Send Fax Options, Restore Defaults, Speed, Pause Duration, Error Correction ECM