Canon MP-C635 user manual Auto Start Send, Off Hook Alarm, Image Contrast, Fax Heading Position

Auto Start Send

When you select this option, the MultiPASS starts scanning automatically when you enter a number and press START or when you press a speed dial number. If you don’t select this option, you must press START twice to scan the document. The default is Auto Start Send enabled.

Off Hook Alarm

You select this option to turn on the alarm if the telephone’s handset is off-hook. The default is Off Hook Alarm enabled.

Image Contrast

You can select a setting that determines the level of contrast in the faxes you send. The default is Standard; this setting is usually appropriate for most documents. However, based on the lightness or darkness of your original fax document, you may prefer to lighten (Lighter) or darken (Darker) the contrast for the fax transmission.

Fax Heading Position

You can select where you want the sent fax heading information (your fax number, your name, and date and time) to print on the faxes you send. This information is known as the Transmit Terminal Identification (TTI). Choose between Outside Imaging Area (the default) and Inside Imaging Area.

On Error Resend

You can select this option if you want the MultiPASS to automatically redial when an error occurs while sending a fax. If this option is selected, you also select which pages should be resent:

❍All Pages—all pages of the fax.

❍Error and First Page—the page on which the error occurred, all pages following the error, and the first page of the fax.

❍Error Pages—the page on which the error occurred, and all following pages. This is the default.

Restore Defaults

If you want to restore the options on the Advanced Send Fax panel to the factory defaults, click the Restore Defaults button.

3-6 Using the MultiPASS Fax Setup Utility Chapter 3