Using the MultiPASS C635 B as a Stand-alone Fax

If you plan to use the MultiPASS C635 as a stand-alone fax, and you do not install the MultiPASS Fax Setup Utility (part of the MultiPASS Desktop Manager software package), you must enter your name and fax number from the operator panel. If you choose to use the MultiPASS C635 this way, you will not be able to use its many features, such as speed dialing or scanning.

Also, you will not be able to change the Transmit Confirmation Report to print after every transaction. (The default for the TX REPORT is to print only when there is an error in transmission.) Canon recommends that you install the MultiPASS software as described in the Quick Start Guide. See Chapter 3 for details on using the MultiPASS Fax Setup Utility.

NIn the United States, you are required by FCC regulations to include your name and fax number every time you send a fax. Be sure to enter this information.

LCD Menu System

To enter the LCD Menu System, press the FUNCTION button on the operator panel. Then press < or > to move between selections and press START/COPY to make a selection. Press STOP to exit the LCD Menu System.

Option

Description/Settings

USER SETTINGS

 

DATE & TIME

Set the date and time (24-hour clock) using the

 

numeric buttons.

UNIT TELEPHONE # Enter your fax number using the numeric

 

buttons (up to 20 characters).

UNIT NAME

Enter the name you want to appear at the top of

 

each fax page you send (up to 24 characters).

TEL LINE TYPE

Sets the dialing method the MultiPASS uses to

 

match the type of phone line you have—

 

TOUCH TONE or ROTARY/PULSE.

Stand-alone Fax

Appendix B

Using the MultiPASS C635 as a Stand-alone Fax B-1

Page 193
Image 193
Canon MP-C635 user manual LCD Menu System, Option Description/Settings