POEGEM12T2SFP User Manual
TX 512 ~ 1023 Bytes:
Displays the total number of 512 ~ 1023 byte frames transmitted.
TX 1024 Bytes:
Displays the total number of 1024 byte frames transmitted.
RX CRC/Alignment:
Displays the total number of Alignment and CRC error packets received.
RX Undersize:
Displays the total number of short frames (<64 bytes) received with valid CRC.
RX Oversize:
Displays the total number of long frames (>1024 bytes) received with valid CRC.
RX Fragments:
Displays the total number of short frames (<64 bytes) received with invalid CRC.
RX Jabber:
Displays the total number of long frames (>1024 bytes) received with invalid CRC.
RX Drops:
Displays the total number of frames dropped due to the receive buffer being full.
RX Errors:
Displays the total number of Error packets received.
TX Collisions:
Displays the total number of collisions transmitted.
TX Drops:
Displays the total number of transmitted frames dropped due to excessive collisions, late collisions or frame aging.
TX FIFO Drops:
Displays the total number of frames dropped due to the transmit buffer being full.
Select:
Used to select what ports statistics are being displayed.
Refresh Interval:
The user can define the amount of time the switch will take to update the ports statistics this is measured in seconds and ranges from 3 – 10.
Default: 3 seconds.
Reset:
The reset button is located at the top right hand side of the screen and is used to reset the counters back to zero.
40
Alloy Computer Products Pty Ltd Copyright ©2006
