POEGEM12T2SFP User Manual 7 Alloy Computer Products Pty Ltd Copyright ©2006 1.4.2. User Interfaces on the Rear Panel
With the POEGEM12T2SFP switch, the SFP ports are paired with RJ-45 copper ports 11 and 12.
Only one of any given paired port can be used. In this manner, these paired ports can be seen as
‘Dual Media’ ports that support 10/100/1000Mbps or 1000Mbps fibre via the SFP interfaces.
Optional 1000Mbps mini-GBIC fibre transceiver modules can be used for high-speed uplink
connections to fibre backbones or servers, when installed in the SFP ports. A range of optional
Alloy mini-GBIC modules are available:
Alloy Part No. Description
MGBIC-T 1000Mbps, mini-GBIC, Copper, 100metres
MGBIC-MLC 1000Mbps multimode 1000Base-SX, 850nm, max. range 500m
MGBIC-SLC10 1000Mbps single-mode 1000Base-LX, 1310nm, max. range 10Km
MGBIC-SLC4013 1000Mbps single-mode 1000Base-LHX, 1310nm, max. range 40Km
MGBIC-SLC4015 1000Mbps single-mode 1000Base-LHX, 1550nm, max. range 40Km
MGBIC-SLC70 1000Mbps single-mode 1000Base-ZX, 1550nm, max. range 70Km
MGBIC-SLC100 1000Mbps single-mode 1000Base-EZX, 1550nm, max. range 100Km
MGBIC-WDMS3.20 1000Mbps WDM single-mode/single-fibre 1310nm, max. range 20Km
MGBIC-WDMS5.20 1000Mbps WDM single-mode/single-fibre 1550nm, max. range 20Km
Notes: * The two WDM (Wave Division Multiplexer) mini-GBIC modules are
designed to facilitate a link over a single core of single-mode fibre cable.
The two units must be used in a paired manner, one at either end of the link.
* Mini-GBIC modules that are designed to the relevant standards should be
compatible with any make of switch with SFP ports. If you have concerns
regarding compatibility, please contact the supplier of your mini-GBIC
product.
* The information given in the table above is current at time of publication;
availability of individual Alloy mini-GBIC modules may vary over time.
Fi
g
. 1-3: Rear View of the POEGEM12T2SFP Switch
AC
Lin
e
1
00
-24
0
V
50/60
Hz
AC mains cable locking clamp
RS-232 DB-9 Serial Port