POEGEM12T2SFP User Manual
Function Name:
Port Status
Function Description:
Reports the current Status of each port; if the state of a port changes the status screen
will refresh every 5 seconds.
Parameter Description:
Port No:
Displays every port on the switch.
Media:
Displays what type of media the port is using. Media will be either TP (Twisted Pair) or Fibre.
Link:
Tells you whether the ports link state is Up or Down, Up being active and Down being inactive.
State:
Shows whether the port is enabled or disabled. If Enabled, traffic can be transmitted and received from that port, if Disabled, no traffic can be passed through this port.
Default: Enabled
Auto Negotiation:
Shows whether the port is running in
Default: Enabled
Speed / Duplex Mode:
Displays the Speed and Duplex settings of each port. Speed settings can either be 10Mbps, 100Mbps or 1000Mbps for Copper supporting both Half and Full Duplex or 1000Mbps Full Duplex for Fibre. If running in
Flow Control:
Shows the port’s flow control status. The POEGEM12T2SFP switches support both Backpressure flow control for Half Duplex and Pause flow control for Full Duplex.
Default: Enabled
31
Alloy Computer Products Pty Ltd Copyright ©2006
