POEGEM12T2SFP User Manual
3-3. POE
The POEGEM12T2SFP supports the IEEE 802.3af PoE standard for Power Injection (PSE). This injects PoE power onto the Cat5 Cable when it detects the presence of a PoE compliant device. When operating with non PoE devices the switch will shut down the power injecting circuitry and as such not cause any damage to your network devices - but still allow them to run on the switch as in the case of a normal Ethernet device.
The POEGEM12T2SFP uses an injection voltage of about 48VDC on pins 1, 2, 3, 6
3-3-1. POE Status
Fig.
Function Name:
POE Status
Function Description:
Display’s information regarding the status of each of the POE ports.
Parameter Description:
Vmain:
The Voltage supplied by the POE device.
Imain:
The total current supplied by each of the POE ports.
Pconsume:
The total power supplied by each port.
Power Limit:
The maximum amount of power the switch can provide. (Read Only)
41
Alloy Computer Products Pty Ltd Copyright ©2006
