POEGEM12T2SFP User Manual
3-16-4. Parameter Setting
Fig.
Function name: Parameter Setting
Function description:
This section is used to configure the parameter settings for each port using 802.1x port security.
Parameters description:
Port:
The port number to be selected to configure 802.1x parameters.
Port Control:
This is used to set the operation mode of the port. There are three modes supported ForceUnauthorised, ForceAuthorised and Auto.
-ForceUnauthorised: The controlled port is forced to stay in the unauthorised state.
-ForceAuthorised: The controlled port is forced to stay in the authorised state.
-Auto: The controlled port will determine its authorisation state depending on the result of the authentication between the authentication server and the supplicant.
Default: Auto
reAuthMAx (1-10):
The number of authentication attempts that are permitted before the port becomes unauthorised.
Default: 2
txPeriod (1 – 65535 sec.):
100
Alloy Computer Products Pty Ltd Copyright ©2006
