Alloy Computer Products POEGEM12T2SFP User Interfaces on the Front Panel Button, LEDs and Plugs

POEGEM12T2SFP User Manual

1.4.1. User Interfaces on the Front Panel (Button, LED's and Plugs)

There are 12x copper RJ-45 Gigabit Ethernet ports and 2x paired SFP fibre ports for optional mini-GBIC modules on the front panel of the switch. The LED display area, located on the left side of the panel, contains a Power LED (which indicates the power status of the switch) a CPU LED (which indicates whether the CPU is working correctly) and 12 LED's that indicate the status of each of the RJ-45 ports on the switch. There are also 2 LED’s that indicate the status of each of the SFP ports.

TP and PoE Port Status Indication Gigabit Ethernet Port SFP Fibre Port

Power Indication LED	Fibre Port Status
& CPU LED	Indication LED’s

RESET Button: RESET button is used to restore the system default settings.

Fig. 1-2 : Front View of the POEGEM12T2SFP Switch

LED Indicators

LED	Colour		Function
			System LED
POWER	Green	Lit when power is active
CPU	Green	Blinks when CPU is active
10/100/1000Mbps Ethernet Copper Ports 1 to 12
PoE-PSE ACT	Green	Lit when PoE Power is active
PoE FAIL	Red	Lit when PoE Power has failed
			- On when connection with remote device is good
LINK/ACT	Green		- Blinks when any traffic is present
			- Off when no link is present
	Green/		- Green when 1000Mbps speed is active
10/100/1000Mbps			- Amber when 100Mbps speed is active
	Amber
			- Off when 10Mbps speed is active
	1000SX/LX Gigabit Fibre Ports 11* & 12*
	Green		- On when connection with the remote device is good
SFP(LINK/ACT)			- Blinks when any traffic is present
			- Off when no link is present

*All SFP ports are paired with one of the 10/100/1000Mbps copper RJ-45 ports. Only one of the paired ports can be used.

6

Alloy Computer Products Pty Ltd Copyright ©2006