POEGEM12T2SFP User Manual

16

Alloy Computer Products Pty Ltd Copyright ©2006

3. Operation of the Web Based Management
The following chapter allows the administrator to monitor and manage the POEGEM12T2SFP
through the web management interface. Management functionality such as Port Based and
802.1q VLAN, Port Aggregation (Trunking), QoS, Port configuration and much more can all be
configured quickly and easily via any port of the POEGEM12T2SFP.
To access the web management open a web browser such as Internet Explorer or Mozilla Firefox
and enter the default IP address into the address bar.
The default network settings for the POEGEM12T2SFP are shown below:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Username: admin
Password: admin
Once you have entered the IP address of the POEGEM12T2SFP into a web browser you will be
prompted with a login screen where you will need to enter a valid username and password to
gain access to the switch. The default username and password are shown above.
The POEGEM12T2SFP only allow one administrator to configure the switch at one time. If
another user has logged into the switch with the administrator credentials then only the first
admin logged in will be able to configure the switch, the other admin will only be able to monitor
the switch. Other users can also be created to gain access to the switch for monitoring purposes
only. In total only three users can have access to the web management at any one time.
Fig. 3-1