Xerox 701P21091 Output Trans, DP 100/115/135/155/180 EPS only Transparencies cannot, Output Units

Specifying print format parameters

OUTPUT TRANS

Specifies whether or not transparencies are used in the print job.

Syntax OUTPUT TRANS = {YES NO}

Options

		Table 4-79. OUTPUT TRANS parameter options and
				definitions
		Option		Definition
		YES		Indicates that transparencies will be used in the job.
		NO		Indicates that transparencies will not be used in the job.
Default
	NO
OUTPUT TRANS	• DP 100/115/135/155/180 EPS only: Transparencies cannot
parameter: points	be handled by the high capacity feeder/stackers. Due to this
to note	restriction, transparency jobs must be fed from the processor
	feeder trays (trays 1 and 2) and delivered to the sample tray.
	(The DP 75/90 EPS can feed transparencies from any tray.)
	• If TRANS is specified in a job, these parameters
	automatically go into effect:
	OUTPUT		DUPLEX = NO;
	ACCT		USER = TRAY;
	OUTPUT		BFORM = NONE;
	RPAGE		SIDE = NUFRONT;

OUTPUT UNITS

Defines the size in dots of the unit of measure that will be used to position a graphic that is referenced by the OUTPUT IMAGE parameter or an IMAGE, ALTER, or GRAPHIC DJDE.

Syntax OUTPUT UNITS = size

Using LCDS Print Description Language 4-87