Xerox 701P21091 manual Line Fontindex, Specifies that there is no font index

Specifying print format parameters

LINE FONTINDEX

Specifies that a field within the user portion of a record defines the index to a specific font to be used for that line. If FONTINDEX is not specified, no index is used.

Syntax LINE FONTINDEX = {offset (offset [, initval [, bitopt]]) NONE}

Options

Table 4-30. LINE FONTINDEX parameter options and definitions

Option	Definition
offset	Specifies the byte offset in the data record where the character that is to be
	used as a font index number is located.
	(Refer to “LINE OVERPRINT,” later in this chapter, for discussion of
	FONTINDEX usage with overprint lines and maximum number of fonts.)
initval	initial value.
	Index number associated with the first font in the font list (i.e., the number the
	font list starts with). This value can be one of the following:
	• ONE specifies that an index value of 1 is associated with the first font in the
	font list.
	• ZERO specifies that an index value of 0 is associated with the first font in
	the font list, an index value of 1 is associated with the second font in the
	font list, and so forth.
	The default for the initial font index value is ONE.
bitopt	bit option
	A number specifying the number of low order bits within the font index byte,
	which, in turn, specifies an index value into the font list of the current PDE. The
	bitopt value may be 1 through 7.
	The default bitopt value is 4.
NONE	Specifies that there is no font index.

Default NONE

Using LCDS Print Description Language 4-27