Xerox 701P21091 manual Summary of Route command parameters, Route Rform, Route Rtext

Specifying print format parameters

Example 2 The following is an example of multiple BEGINs. Two logical pages are defined on one physical page.

2UP: PDE	BEGIN=(.5 IN,.5 IN),
	BEGIN=(6.5IN,.5 IN),
	PMODE=PORTRAIT,
	FONTS=P1012B;

Example 3 This is an example of a PDE that may be compiled separately from a JDL. The compilation process creates a .PDE object file, which may be referenced from within a JDL or by a DJDE. The name of the object file for this PDE is PDE99.PDE (the same as its identifier in the source command shown below).

PDE99: PDE	PMODE=PORTRAIT,
	BEGIN=(.10,0),
	FONTS=(P07ITA,P08OAA);
END;

ROUTE command

The ROUTE command allows you to print identifying information (text and an optional form) on a page preceding a report. You may code this command within a JDL or in a disk file of ROUTE commands.

ROUTE command parameters

The following table summarizes the ROUTE command parameters.

Table 4-87. Summary of ROUTE command parameters

Parameter	Specifies	Online	Offline	DJDE
ROUTE RFORM	Specifies a form that will be printed with RTEXT	Y	Y	Y
	pages.
ROUTE RTEXT	Specifies the text that will be printed preceding a	Y	Y	Y
	report copy.

The following sections describe the syntax of the ROUTE command parameters and explain the parameter options.

Using LCDS Print Description Language 4-99