9243644_6155_en_au.fm Page 58 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances.
Hands-free operation
You can set as many as 16 voice commands to enable
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1.In standby mode, select Menu > Settings > Voice commands.
2.Select the device function you want to tag: Profiles, Voice mailbox, Radio, Infrared, Voice recorder or Call register.
3.If necessary, select an option associated with that function.
4.Select Add, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag. 
appears next to commands with voice tags assigned.
Activate a voice command
After you have associated a voice tag with a function in your device, to issue a command, speak the voice tag.
1.In standby mode, press and hold the right selection key or voice key.
2.With Speak now displayed, pronounce the voice tag clearly into the microphone.
With the voice tag found, the device displays Found:, and plays the recognised voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the following options:
58
