9243644_6155_en_au.fm Page 57 Wednesday, December 28, 2005 11:28 AM
S e t t i n g s
■Connectivity
Infrared
You can set up the phone to receive data through its IR port. To use an IR connection, transmission and reception must be to or from an IR compatible phone or device. You can send or receive data such as business cards, graphics, images, sound clips, music files, videos, and calendar notes to or from a compatible phone or data device (such as a computer) using the IR port of your phone.
Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be restarted.
Connection indicator
•When 
is shown continuously, the IR connection is activated and your phone is ready to send or receive data using its IR port.
•When 
blinks, your phone is trying to connect to the other device or a connection has been lost.
■Voice commands and voice tags
Before using voice tags, note the following:
Send and receive data
1.Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from 3 inches to 3 feet.
2.To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.
3.The user of the other device must activate IR as well.
•Voice tags are not language- dependent, but depend on the speaker’s voice.
•You must say the name exactly as you said it when you recorded it.
•Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.
•Very short names are not accepted. Use long names, and avoid similar names for different numbers.
57
