9243644_6155_en_au.fm Page 52 Wednesday, December 28, 2005 11:28 AM

S e t t i n g s

Time and date settings

Clock

In standby mode, select Menu > Settings > Time and date > Clock > Show clock or Hide clock, Set the time, Time zone or Time format.

Date

In standby mode, select Menu > Settings > Time and date > Date > Show date or Hide date, Set the date, Date format, or Date separator.

Date and time auto-update

Auto-update is a network service. See “Network services”, p. viii. If your network operator supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone.

In standby mode, select Menu > Settings > Time and date > Auto- update of date & time > On, Confirm first, or Off.

If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you reenter your digital network.

If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (when the battery is replaced or recharged, and you are still outside of the digital network).

Call settings

Anykey answer

Anykey answer enables you to answer an incoming call. Briefly press any key except the right selection or end key. In standby mode, select Menu > Settings > Call > Anykey answer > On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial.

With automatic redial activated, your device redials the number (number of times is specified by the network), and notifies you when the network is available. In standby mode,

select Menu > Settings > Call > Automatic redial > On or Off.

Speed dials

You can activate or deactivate speed dials. In standby mode, select Menu > Settings > Call > Speed dials > On or Off. See “Set up speed dials”, p. 34.

52

Page 62
Image 62
Nokia 6155 manual Call settings