9243644_6155_en_au.fm Page 28 Wednesday, December 28, 2005 11:28 AM

M e s s a g e s

4.Enter any dialling codes as necessary after the entered phone number.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.

5.Enter any remaining pauses or other information that enables you to listen to your messages, and select OK.

6.Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned speed dials key in standby mode.

Insert dialling codes

After having entered your desired phone number, press * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialling string.

The following dialling codes are available:

*—Bypasses a set of instructions.

p—Pauses for 2.5 seconds before sending any numbers that follow.

+—Replaced by the international access code.

w—Waits for you to press the call key before sending the numbers or codes that follow.

Clear voice mail icon

To clear the voice mail icon from the display, in standby mode, select Menu > Messages > Voice messages > Clear voice message icon.

Web messaging

Web messaging is a network service. See “Network services”, p. viii.

If your network operator supports this feature, you can use the minibrowser to check for e-mail messages.

In standby mode, select Menu > Messages > Minibrowser messages > Connect.

28

Page 38
Image 38
Nokia 6155 manual Web messaging, Clear voice mail icon, Insert dialling codes