9243644_6155_en_au.fm Page 71 Wednesday, December 28, 2005 11:28 AM
O r g a n i s e r
5.If you do not enter an exchange rate, the device will prompt you to do so. Select OK. You can edit the exchange rate at anytime.
■Countdown timer
The countdown timer in your device enables you to enter a specific time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm.
Note: The countdown timer only works when the device is on. When you turn off your device, the timer is no longer active.
displays the timer note, vibrates (if set), and flashes its lights.
Press any key during the alarm to stop the alarm. After 30 seconds the timer alert stops automatically.
Change the time
After you have set the timer, you can change the time.
1.In standby mode, select Menu > Organiser > Timer > Change time.
2.Enter the new time, and select OK.
3.Leave the note as it was, or enter a new note; select Start.
Set the timer
1.In standby mode, select Menu > Organiser > Timer > Normal timer, Interval timer, or Settings.
Normal timer measures the countdown time for tasks that have one period (timer name). Interval timer saves sets of countdown times with more than one period.
2.Enter the time (in hh:mm:ss format), and select OK.
3.Enter a note for the timer, and select Start.
appears in standby mode with the countdown timer set. When the time runs out, your device sounds an alarm,
Interrupt the timer
After you have set the timer, you can stop the timer. In standby mode, select Menu > Organiser > Timer > Stop timer.
■Stopwatch
You can use the stopwatch in your device to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.
71
