
A P P E N D I X H
Service Processor Commands
The sp command gets or sets the configuration values for the Service Processor (SP), generates or manages events and notices; or adds or modifies subscribers, event routes and
TABLE
Note – Every command returns a return code upon completion.
TABLE H-1 Service Processor Subcommand Groups
Subcommand | Description |
|
|
Date | Sets or retrieves the date and time on the SP RTC. |
DNS | Displays or configures the DNS client configuration on the SP. |
Events | Returns detailed information or clears an event. |
Hostname | Displays or resets the host name or domain name of the SP. |
IP | Sets, modifies or retrieves the SP network configuration. |
JNET Address | Sets or retrieves the jnet address. |
Locate Light | Sets the state or reads the value of the locatelight switch. |
Logfile | Retrieves or configures the event log file. |
Miscellaneous | Reads status for a component, retrieves the last port 80 postcode, |
| restores settings to defaults, stores data in tar zipped format, or |
| captures debug data. |
Mount | Displays, creates, resets or deletes a mount point. |
SMTP | Manages information about SMTP email delivery. |
|
|
161