Sun Microsystems V20Z, V40z manual Access Delete Public Key Subcommand

Return Codes

TABLE B-28lists the return codes for this subcommand.

TABLE B-28Return Codes for Subcommand access get public key users

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting
		options specified.
NWSE_RPCTimeout	2	Request was issued, but was not serviced by the
		server. RPC procedure timed out and the request may
		or may not have been serviced by the server.
NWSE_RPCNotConnected	3	Unable to connect to the RPC server.
NWSE_NoPermission	6	Not authorized to perform this operation.

Access Delete Public Key Subcommand

Description: All users can execute this command to remove their own public key. Manager-level users can execute this command to remove the public key for any user.

Format

Command format:

access delete public key [-u --user] USER [-a --all] [-q --quiet]

TABLE B-29lists the arguments for this subcommand.

TABLE B-29Arguments for Subcommand access delete public key

Arguments	Description
[-u --user]	The user whose public key will be removed. Defaults to the current
	user If USER is not specified. This argument is repeatable to remove
	multiple public keys at one time.
[-a --all]	Removes all public keys.
[-q --quiet]	If the user to delete is not found, this argument specifies that no
	error be returned.

98 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004