Sun Microsystems V20Z, V40z Return Codes, Table D-5lists the return codes for this subcommand

To obtain the board revision, product ID and PRS revision, you can run the following commands:

inventory get hardware -D '' awk -F '' '/PRS/{print $8}'

inventory get hardware -D '' awk -F '' '/PRS/{print $7}' awk '{print $4}'

inventory get hardware -D '' awk -F '' '/PRS/{print $6}'

You can also obtain this information by running the sensor get command.

Return Codes

TABLE D-5lists the return codes for this subcommand.

TABLE D-5Return Codes for Subcommand inventory get hardware

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting
		options specified.
NWSE_RPCTimeout	2	Request was issued, but was not serviced by the
		server. RPC procedure timed out and the request
		may or may not have been serviced by the server.
NWSE_RPCNotConnected	3	Unable to connect to the RPC server.

120 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004