
Return Codes
TABLE H-29 lists the return codes for this subcommand.
TABLE H-29 Return Codes for Subcommand sp get jnet
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting |
|
| options specified. |
NWSE_NoMemory | 8 | Insufficient memory. |
NWSE_Busy | 9 | Device or resource is busy. |
NWSE_HostDown | 14 | Host is down. |
|
|
|
SP Set JNET Subcommand
Description: Sets or modifies the SP and platform network addresses for JNET. Because of the firewall between these drivers, you must specify both addresses at the same time.
Both the SP and Platform JNET addresses must be on the same Class C subnet.
Format
Command format:
sp set jnet
178 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004