
Diags Get Tests Subcommand
Description: Returns data describing the diagnostic tests that are available. This data includes the specific test name and the module to which the test applies.
Format
Command format:
diags get tests [{
TABLE C-5 lists the arguments for this subcommand.
TABLE C-5 Arguments for Subcommand diags get tests
ArgumentsDescription
Specifies to return information for all tests in the server. Specifying no arguments also returns all tests available for each device in the server.
Suppresses header output.
Delimits columns with the specified delimiter. Headings are also delimited unless suppressed. The delimiter can be any character or string.
Return Codes
TABLE C-6 lists the return codes for this subcommand.
TABLE C-6 Return Codes for Subcommand diags get tests
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting |
|
| options specified. |
NWSE_RPCTimeout | 2 | Request was issued, but was not serviced by the |
|
| server. RPC procedure timed out and the request may |
|
| or may not have been serviced by the server. |
NWSE_RPCNotConnected | 3 | Unable to connect to the RPC server. |
|
|
|
Appendix C Diagnostics Commands 111