Sun Microsystems V20Z, V40z manual Table A-2Return Codes

TABLE A-1Server Management Commands

Command	Description
sensor	Reports or sets the value of an environmental sensor or
	control.
	See Appendix G, “Sensor Commands.”
sp	Allows the authorized user to manage and monitor the SP
	configurations, such as networking, external file system,
	SNMP, SMTP, SSL, event logs and so on.
	See Appendix H, “Service Processor Commands.”
help	Returns the following text:
	Available Commands: platform, access, sp,
	sensor, inventory, ipmi. Each of these
	commands includes a help option (--help).

Return Codes

Every subcommand returns one or more of the following return codes upon completion. Refer to the following appendices in this user guide for each subcommand and the corresponding return codes for that subcommand.

TABLE A-2Return Codes	(1 of 2)
Return Code	ID	Description
NWSE_Success	0	Command successfully
		completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter
		usage, conflicting options
		specified.
NWSE_RPCTimeout	2	Request was issued, but was not
		serviced by the server. RPC
		procedure timed out and the
		request may or may not have
		been serviced by the server.
NWSE_RPCNotConnected	3	Unable to connect to the RPC
		server.
NWSE_InvalidArgument	4	One or more arguments were
		incorrect or invalid.
NWSE_NotFound	5	Entity (user, service, file, path,
		etc.) was not found.

76 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004