Sun Microsystems V40z Table F-3Common COM1 Values, Table F-4Common Values for Console Redirection

TABLE F-3lists common COM1 values. TABLE F-4lists common values for console redirection.

TABLE F-3Common COM1 Values

I/O Device Configuration

Serial port A	Enabled
Base I/O address	3F8
Interrupt	IRQ 4

TABLE F-4Common Values for Console Redirection

Console Redirection

Com Port Address	On-board COM A
Console connection	Direct
Baud Rate	19.2K
Flow Control	None
Console Type	ANSI

Note – You can change these values, as long as they are the same as serial-port values for the operating system (OS). If your operating system supports the COM2-4 values, you can set these for the BIOS settings.

The serial-console settings in the platform OS should be set to match the BIOS settings.

Enter the following while you are connected to the console:

^Ec character

where ^E represents Control-Eand character is one of the entries in TABLE F-5:

TABLE F-5Serial-Console Values

Character	Function
.	Disconnects an attach read/write.
b	Sends a broadcast message.
c	Toggles flow control.
d	Takes down a console.
e	Changes the escape sequence.

Appendix F Platform Commands 135