POST Error Code FRU/Action
20104 1. Memory Module DRAM, VRAM
2. Printer/Scanner Option
3. Image Adapter/A
20105 to 20110 1. Printer/Scanner Option
2. Image Adapter/A
3. Memory Module DRAM, VRAM
Image Adapter/AMemory Test failure indicated
by graphic of adapter 1. Replace memory module (shown in graphic)
206XX 1. SCSI-2 Adapter
2. Any SCSI Device
3. System Board
4. Riser card
208XXVerifythere are no duplicate SCSI ID
settings on the same bus. 1. Any SCSI Device
210XXXXInternal bus, size
unknown210XXX1External bus, size unknown 1. SCSI Hard Disk Drive
2. SCSI Adapter or System Board
3. SCSI Cable
4. SCSI ID Switch (on some models)
TapeDrive amber LED remains on 1. TapeDrive
2. SCSI Cable (internal)
3. SCSI Adapter or System Board
TapeDrive green ″in use″LED fails to come on 1. TapeDrive
2. SCSI Adapter or System Board
3. SCSI Cable (internal)
4. SCSI Cable (external)
Tapeautomatically ejected from drive 1. TapeCassette
Drive
SCSI ID on rotary switch does not match SCSI ID
set in configuration. Verifydrive switches inside
cover are set to zero
1. Rotary Switch Circuit Board
2. Circuit Board Cable
3. TapeDrive
Tapesticks or breaks in drive. Verify that the tapes
used meet ANSI standardX3B5 1. TapeCassette
212XX 1. SCSI Printer
2. Printer Cable
213XX 1. SCSI Processor
Chapter2. Types 6568/6569/6648/6649 85