IBM 6579, 6578, 6269, 6059, 6058, 6569, 6568, 6648, 6649 manual Setup Utility program

Setup Utility program

Attention: A customized setup configuration (other than default settings) might exist on the computer you are servicing. Running the Setup Utility program might alter those settings. Note the current configuration settings and verify that the settings are in place when service is complete.

The Setup Utility (configuration) program is stored in the permanent memory of the computer. This program includes settings for the following:

vSystem Summary

vProduct Data

vDevices and I/O Ports

vStart Options

vDate and Time

vSystem Security

vAdvanced Setup

vPower Management

To run the Setup Utility program, use the following procedure.

1.Power-off the computer and wait for a few seconds until all in-use lights go off.

2.Power-on the computer.

3.When the Setup Utility prompt appears on the screen during start-up, press F1. The Setup Utility menu will appear.

4.Follow the instructions on the screen.

5.When finished, select System Summary to verify that any configuration changes have been accepted.

122Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649