IBM 6648, 6578, 6579, 6269, 6059, 6058, 6569, 6568, 6649 manual Riser card, if installed, PCI card

Diagnostic Error Code	FRU/Action
018-0XX-XXXPCI Card Failure	1.	Riser card, if installed
	2.	System board
018-195-XXXPCI Card Test aborted by user	1.	PCI card
	2.	Information
	3.	Re-start the test, if necessary
018-196-XXXPCI Card test halt, error threshold	1.	Press F3 to review the log file
exceeded	2.	Re-start the test to reset the log file
018-197-XXXPCI Card test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
018-198-XXXPCI Card test aborted	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
018-199-XXXPCI Card test failed, cause	1.	Go to the ″Undetermined problems″ section
unknown
	2.	Flash the system and re-test
	3.	Replace component under function test
018-250-XXXPCI Card Services error	1.	PCI card
	2.	Riser card, if installed
	3.	System board
020-000-XXXPCI Interface Test Passed	1.	No action
020-0XX-XXXPCI Interface error	1.	PCI card
	2.	Riser card, if installed
	3.	System board
020-195-XXXPCI Test aborted by user	1.	Information
	2.	Re-start the test, if necessary
020-196-XXXPCI test halt, error threshold	1.	Press F3 to review the log file
exceeded
	2.	Re-start the test to reset the log file

Chapter 1. IBM PC Enhanced Diagnostics error codes 11