Message/Symptom

FRU/Action

 

 

 

Serial or parallel port device failure (system board

1.

External Device Self-Test OK?

port)

2.

External Device

 

 

3.

Cable

 

4.

System Board

 

 

 

Serial or parallel port device failure (adapter port)

1.

External Device Self-Test OK?

 

 

2.

External Device

 

3.

Cable

 

4.

Alternate Adapter

 

5.

System Board

 

 

 

Some or all keys on the keyboard do not work

1.

Keyboard

 

 

2.

Keyboard Cable

 

3.

System Board

 

 

 

Undetermined problems

Check the power supply voltages. See “Power supply” on page 30. If the voltages are correct, return here and continue with the following steps.

1.Power-off the computer.

2.Remove or disconnect the following components (if installed) one at a time.

a.Non-IBM devices

b.External devices (modem, printer, or mouse)

c.Any adapters

d.Riser card

e.Memory modules

Before removing or replacing memory modules, see “System board memory” on page 55.

f.Extended video memory

g.External Cache

h.External Cache RAM

i.Hard disk drive

j.Diskette drive

3.Power-on the computer to re-test the system.

4.Repeat steps 1 through 3 until you find the failing device or adapter.

If all devices and adapters have been removed, and the problem continues, replace the system board. See “Replacing a system board” on page 45.

90Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649

Page 104
Image 104
IBM 6569, 6578, 6579, 6269, 6059, 6058, 6568, 6648, 6649 manual Undetermined problems, External Device Self-Test OK?