IBM 6648 Information, Press F3 to review the log file, Connected and/or enabled, System board

Diagnostic Error Code	FRU/Action
000-038-XXXBIOS Extension failure	1.	Flash the system
	2.	Adapter card
	3.	System board
000-039-XXXBIOS DMI data error	1.	Flash the system
	2.	System board
000-195-XXXBIOS Test aborted by user	1.	Information
	2.	Re-start the test, if necessary
000-196-XXXBIOS test halt, error threshold	1.	Press F3 to review the log file
exceeded
	2.	Re-start the test to reset the log file
000-197-XXXBIOS test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
000-198-XXXBIOS test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
000-199-XXXBIOS test failed, cause unknown	1.	Go to the ″Undetermined problems″ section
	2.	Flash the system and re-test
	3.	Replace component under function test
000-250-XXXBIOS APM failure	1.	Flash the system
	2.	System board
000-270-XXXBIOS ACPI failure	1.	Flash the system
	2.	System board
001-000-XXXSystem Test Passed	1.	No action
001-00X-XXXSystem Error	1.	System board
001-01X-XXXSystem Error	1.	System board
001-024-XXXSystem Addressing test failure	1.	System board
001-025-XXXSystem Checksum Value error	1.	Flash the system
	2.	System board
001-026-XXXSystem FLASH data error	1.	Flash the system
	2.	System board

2Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649