A40/A40P Clear CMOS/Flash Boot Block Recovery
Use the recovery jumper setting to Clear CMOS or to Flash Boot Block
Recover.
Jumper Setting Description
CMOS Reset 2-3 CMOSReset/Flash Recovery Mode
1-2 (D) Normal Mode
Note: The A40/A40P CMOS clear/recovery jumper pins arenumbered as
follows:
vPin 1 is the farthest from the battery.
vPins 2 and 3 are below pin 1, as seen in the A40/A40P System Board
layout.
A40/A40P Processor Speed Settings
Processor speed for NetVista type 6058/6059/6578/6579 computers is fixed
and is determined by the processor.There are no settings required.
A40/A40P Diskette Write Access
Diskette Write Enable and WriteProtect options are changed in the Setup
Configuration. See “Setup Utility program”on page 122.
Chapter3. Types 6058/6059/6269/6578/6579 149