IBM 6578, 6579, 6269, 6059, 6058, 6569, 6568, 6648, 6649 manual SIMM/DIMM/RIMM memory errors

SIMM/DIMM/RIMM memory errors

SIMM/DIMM/RIMM error messages issued by the IBM PC Enhanced

Diagnostics.

Message	Failure Found	Recommended Actions
2xx-1y	A memory error was detected in	Replace the SIMM in the socket
	SIMM socket Y.	identified by the last digit of the
		error code.
		Re-run the test.
		If the same error code occurs
		again, replace the system board.
2xx-2y	A memory error was detected in	Replace the DIMM/RIMM in the
	DIMM/RIMM socket Y	socket identified by the last digit
		of the error code.
		Re-run the test.
		If the same error code occurs
		again, replace the system board
		or where memory is on the
		processor card, replace the
		processor card.
Corrupt BIOS	Information in BIOS is not as	Reflash the BIOS.
	expected.	Perform boot block recovery.
	Not able to find expected DMI	Replace the system board.
	information from BIOS.
	Memory controller chipset
	vendor ID does not match
	expected value.
Test aborted by user	User stopped test.	Restart test.

Note: Y is the SIMM/DIMM/RIMM socket number. Use the System Board Layout section in the latest Hardware Maintenance Manual (HMM) to reference the memory sockets.

Chapter 3. Types 6058/6059/6269/6578/6579 121