IBM 6649, 6578, 6579, 6269, 6059, 6058, 6569 XXX PCI card, XXX No action, 025-00X-XXX IDE signal cable

Diagnostic Error Code	FRU/Action
020-197-XXXPCI test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
020-198-XXXPCI test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
020-199-XXXPCI test failed, cause unknown	1.	Go to the ″Undetermined problems″ section
	2.	Flash the system and re-test
	3.	Replace component under function test
020-262-XXX	1.	PCI card
PCI system error
	2.	Riser card, if installed
	3.	System board
025-000-XXX	1.	No action
IDE interface Test Passed
025-00X-XXX	1.	IDE signal cable
025-01X-XXXIDE interface failure
	2.	Check power supply
	3.	IDE device
	4.	System board
025-027-XXXIDE interface Configuration/Setup	1.	IDE signal cable
error	2.	Flash the system
	3.	IDE device
	4.	System board
025-02X-XXX	1.	IDE signal cable
025-03X-XXX
	2.	Check power supply
025-04X-XXXIDE Interface failure
	3.	IDE device
	4.	System board
025-195-XXXIDE interface Test aborted by user	1.	Information
	2.	Re-start the test, if necessary
025-196-XXXIDE interface test halt, error	1.	Press F3 to review the log file
threshold exceeded
	2.	Re-start the test to reset the log file

12Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649