IBM 6058, 6578, 6579, 6269, 6059, 6569 Microprocessors, Flash the system and re-test, Flash system

Diagnostic Error Code	FRU/Action
086-198-XXXMouse Port interface test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
086-199-XXXMouse Port interface test failed,	1.	Go to the ″Undetermined problems″ section
cause unknown
	2.	Flash the system and re-test
	3.	Replace component under function test
089-000-XXXMicroprocessor Test Passed	1.	No action
089-XXX-XXXMicroprocessor failure	1.	Microprocessor(s)
	2.	System board
089-195-XXXMicroprocessor Test aborted by	1.	Information
user
	2.	Re-start the test, if necessary
089-196-XXXMicroprocessor test halt, error	1.	Press F3 to review the log file
threshold exceeded
	2.	Re-start the test to reset the log file
089-197-XXXMicroprocessor test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
089-198-XXXMicroprocessor test aborted	1.	Flash the system and re-test
	2.	Go to the ″Undetermined problems″ section
089-199-XXXMicroprocessor test failed, cause	1.	If a component is called out, make sure it is
unknown
		connected and/or enabled
	2.	Go to the ″Undetermined problems″ section
	3.	Flash the system and re-test
	4.	Replace component under function test
170-000-XXXVoltage Sensor(s) Test Passed	1.	No action
170-0XX-XXXVoltage Sensor(s) failure	1.	Flash system
	2.	System board
170-195-XXXVoltage Sensor(s) Test aborted by	1.	Information
user
	2.	Re-start the test, if necessary
170-196-XXXVoltage Sensor(s) test halt, error	1.	Press F3 to review the log file
threshold exceeded
	2.	Re-start the test to reset the log file

Chapter 1. IBM PC Enhanced Diagnostics error codes 17