IBM 6648, 6569, 6568, 6649 manual Types 6058/6059/6269/6578/6579

POST Error Code	FRU/Action
175	1.	Run Configuration. See “Setup Utility
		program” on page 122.
	2.	System Board
176	1.	Covers were removed from the computer
177Corrupted Administrator Password	1.	System Board
178	1.	System Board
183	1.	Enter the administrator password
184No RFID Antenna	1.	Make sure Asset Care and Asset ID are
		enabled in Configuration/Setup
	2.	RFID Antenna
	3.	System Board
185Corrupted boot sequence	1.	Set configuration and reinstall the boot
		sequence
186	1.	System Board
187	1.	Clear Administration password
	2.	System Board
189	1.	More than three password attempts were
		made to access the computer
190Chassis intrusion detector was cleared. This is	1.	System Board
information only, no action required. If this code
does not clear:
1XXNot listed above	1.	System Board
201, 20XMemory data error	1.	Run Enhanced Diagnostics Memory Test
	2.	Memory Module
	3.	System Board
225	1.	Unsupported Memory
229External cache test error	1.	L2 Cache Memory
	2.	System Board
262POST detected a base memory or extended	1.	Run Setup. Check System Summary menu for
memory type error
		memory. (See “Setup Utility program” on
		page 122.)
	2.	Run the Extended Memory Diagnostic tests.

Chapter 3. Types 6058/6059/6269/6578/6579 155