IBM 6579, 6578, 6269, 6059, 6058, 6569, 6568, 6648, 6649 manual RAID signal cable

Diagnostic Error Code	FRU/Action
030-197-XXXSCSI interface test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
030-198-XXXSCSI interface test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
030-199-XXXSCSI interface test failed, cause	1.	Go to the ″Undetermined problems″ section
unknown
	2.	Flash the system and re-test
	3.	Replace component under function test
035-000-XXXRAID interface Test Passed	1.	No action
035-0XX-XXXRAID interface Failure	1.	RAID signal cable
	2.	RAID device
	3.	RAID adapter card, if installed
	4.	System board
035-195-XXXRAID interface Test aborted by	1.	Information
user
	2.	Re-start the test, if necessary
035-196-XXXRAID interface test halt, error	1.	Press F3 to review the log file
threshold exceeded
	2.	Re-start the test to reset the log file
035-197-XXXRAID interface test warning	1.	Make sure the component that is called out is
		connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning statement
	4.	Component under test
035-198-XXXRAID interface test aborted	1.	If a component is called out, make sure it is
		connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″ section
035-199-XXXRAID interface test failed, cause	1.	Go to the ″Undetermined problems″ section
unknown
	2.	Flash the system and re-test
	3.	Replace component under function test
071-000-XXXAudio port Interface Test Passed	1.	No action

14Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,

6649