Sun Microsystems V20Z, V40z manual Table H-25lists the arguments for this subcommand

TABLE H-25lists the arguments for this subcommand.

TABLE H-25Arguments for Subcommand sp set ip

Argument	Description
{-i --ipaddress}	Specifies the IP address you wish to set.
{-n --netmask}	Specifies the netmask; the default value is 255.255.255.0.
{-g --gateway}	Specifies the gateway; the default value is the existing gateway.
{-w --nowait}	If you specify the -nowaitoption, loss of connectivity will
	occur some time after the command returns. If you do not
	specify the -nowaitoption, your connections to the SP will be
	lost before the command returns.

Return Codes

TABLE H-26lists the return codes for this subcommand.

TABLE H-26Return Codes for Subcommand sp set ip

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting
		options specified.
NWSE_InvalidArgument	4	One or more arguments were incorrect or invalid.
NWSE_NoPermission	6	Not authorized to perform this operation.
NWSE_NoMemory	8	Insufficient memory.
NWSE_Busy	9	Device or resource is busy.
NWSE_RPCConnected	11	RPC client already connected.
NWSE_RPCConnRefused	12	RPC connection refused.
NWSE_NoRouteToHost	13	No route to host (network down).
NWSE_HostDown	14	Host is down.
NWSE_UnknownError	15	Miscellaneous error not captured by other errors.
NWSE_GatewayOffNet	16	Gateway address is not on network.
NWSE_NetMaskIncorrect	17	An inappropriate netmask was specified.

176 Sun Fire V20z and Sun Fire V40z Servers, Server Management Guide • May, 2004