Sun Microsystems V40z, V20Z manual Table H-76lists the argument for this subcommand

TABLE H-76lists the argument for this subcommand.

TABLE H-76Argument for Subcommand sp add snmp-destination

ArgumentsDescription

IP ADDRESS/HOSTNAME Specifies the IP address or name of the host for the destination you wish to add.

This argument is repeatable to add multiple destinations at one time; however, the number of destinations you can create is limited due to memory constraints.

Return Codes

TABLE H-77lists the return codes for this subcommand.

TABLE H-77Return Codes for Subcommand sp add snmp-destination

Return Code	ID	Description
NWSE_Success	0	Command successfully completed.
NWSE_InvalidUsage	1	Invalid usage: bad parameter usage, conflicting
		options specified.
NWSE_RPCTimeout	2	Request was issued, but was not serviced by the
		server. RPC procedure timed out and the request may
		or may not have been serviced by the server.
NWSE_InvalidArgument	4	One or more arguments were incorrect or invalid.
NWSE_NoPermission	6	Not authorized to perform this operation.
NWSE_NoMemory	8	Insufficient memory.
NWSE_RPCConnRefused	12	RPC connection refused.
NWSE_UnknownError	15	Miscellaneous error not captured by other errors.
NWSE_FileError	18	File open, file missing, or a read or write error
		occurred.
NWSE_Exist	19	Entity (user, service or other) already exists.

Appendix H Service Processor Commands 213