
TABLE
Return Code | ID | Description |
|
|
|
NWSE_RPCConnRefused | 12 | RPC connection refused. |
NWSE_UnknownError | 15 | Miscellaneous error not captured by other errors. |
NWSE_FileError | 18 | File open, file missing, or a read or write error |
|
| occurred. |
|
|
|
SP Get SNMP Destinations Subcommand
Description: Displays the available SNMP destinations (IP address or host name) to which the SP is configured to send. Many networking programs use this information to identify the machine.
Format
Command format:
sp get
Return Codes
TABLE H-80 lists the return codes for this subcommand.
TABLE
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting options |
|
| specified. |
NWSE_RPCTimeout | 2 | Request was issued, but was not serviced by the server. |
|
| RPC procedure timed out and the request may or may |
|
| not have been serviced by the server. |
NWSE_RPCNotConnected | 3 | Unable to connect to the RPC server. |
NWSE_NoMemory | 8 | Insufficient memory. |
NWSE_UnknownError | 15 | Miscellaneous error not captured by other errors. |
NWSE_FileError | 18 | File open, file missing, or a read or write error occurred. |
|
|
|
Appendix H Service Processor Commands 215