Sun Microsystems V40z, V20Z SP Jnet Address Subcommands, SP Get Jnet Subcommand, Jnet Subcommands

SP JNET Address Subcommands

The JNET address is used for communications between the SP and the platform. The subcommands in TABLE H-27manage the SP JNET address.

TABLE H-27 SP			JNET Subcommands
Subcommand			Description
sp	get	jnet	Retrieves the JNET address.
sp	set	jnet	Sets the JNET address.

SP Get JNET Subcommand

Description: Retrieves the IP address of the platform JNET driver.

Format

Command format:

sp get jnet [{-H --noheader}] [{-D --delim<DELIMITER>}]

TABLE H-28lists the arguments for this subcommand.

TABLE H-28Arguments for Subcommand sp get jnet

ArgumentDescription

{-H --noheader } Suppresses column headings.

{-D --delim } Delimits columns with the specified delimiter. Headings are also delimited unless suppressed. The delimiter can be any character or string.

Appendix H Service Processor Commands 177