
IPMI Enable Channel Subcommand
Description: Allows you to enable one of two IPMI channels.
Format
Command format:
ipmi enable channel {sms lan}
TABLE E-4 lists the arguments for this subcommand.
TABLE | Arguments for Subcommand ipmi enable channel |
|
|
Arguments | Description |
|
|
sms | The ID of the channel to enable for the System Interface; not |
lan | The ID of the channel to enable for the LAN Interface; not |
| If you are activating the LAN channel for the first time, you are prompted |
| for a password to associate with the null user. |
|
|
Return Codes
TABLE E-5 lists the return codes for this subcommand
TABLE E-5 Return Codes for Subcommand ipmi enable channel
Return Code | ID | Description |
|
|
|
NWSE_Success | 0 | Command successfully completed. |
NWSE_InvalidUsage | 1 | Invalid usage: bad parameter usage, conflicting |
|
| options specified. |
NWSE_InvalidArgument | 4 | One or more arguments were incorrect or invalid. |
NWSE_NoPermission | 6 | Not authorized to perform this operation. |
NWSE_ServiceNotAvailable | 24 | Requested service is not available. |
|
|
|
Appendix E IPMI Commands 125